Table of Contents
How to install the IRL Dashboard
Install the dashboard from Plug-ins in the Mudi admin page. No terminal is needed. The dashboard is free and available by personal invitation; there is no public package feed or shared install link.
Before you start
- A GL.iNet Mudi 7 (GL-E5800), powered and connected to the internet.
- A phone or computer on the router's Wi-Fi or LAN.
- Your private invitation page. Request an invitation if you do not have one.
- A few minutes off air. If GL.iNet offers a firmware update, apply it and let the router reboot before installing the dashboard.
Keep the invitation, custom-source URL and install command private. They contain your personal access token. An invitation expires after its allowed successful installs; do not assume it can be reused for another router or a reinstall.
Install from the Mudi admin page
- Open
http://192.168.8.1and sign in to the GL.iNet admin page. If you changed the router's LAN address, use that address instead. - Open APPLICATIONS → Plug-ins → Manage Sources. Some firmware calls this Add Custom Software Source.
- Enter
streamhelpersas the source name. Copy the custom software source URL from your private invitation page into the URL box. Do not copy someone else's URL or use the invitation page address itself. - Press the + button beside the URL box to add the source, then Save. Apply alone does not add it.
- Return to Plug-ins and press Refresh (or Update) to reload the package list.
- Search for
streamhelpers-dashboardand press Install. - Wait up to about five minutes. The Plug-ins window may say Installation succeeded before the dashboard's background setup has finished. Keep the router powered and online; you can close the Plug-ins window.
- Open
http://streamhelpers.lan/orhttp://192.168.8.1/streaming/. With a different LAN address, use that address followed by/streaming/.
The GL.iNet admin page manages the router. The new StreamHelpers dashboard manages the streaming rig; they are separate pages on the same router.
First-time setup
The first visit opens Set up your stream. Follow the questions for your cameras, director phone, receiver and publishing destinations. See Guided setup for the full walkthrough.
- Install the Companion on the Android devices you will use.
- Set up a receiver if your stream uses SRTLA bonding.
- Set a Dashboard login before allowing remote access.
- Check the Going live guide and make a short test stream before relying on the rig.
Only configure the features you use. Optional tabs appear according to Settings → Menu bar and the feature settings.
If installation does not work
| What happens | What to do |
|---|---|
| The package does not appear | Check that you pressed + and Save for the custom source, then Refresh in Plug-ins. Check the router's internet connection and copy the source URL again from your own invitation. |
| The source is refused with a signature error | Follow the alternative command-line instructions on your invitation page. Some firmware also offers a signature-check option specifically for custom sources; do not disable verification globally. |
| The invitation is unavailable | It may be expired, revoked or used up. Ask the person who issued it; do not repeatedly try another person's link. |
| Plug-ins says installation succeeded but the dashboard does not open | Allow the background setup up to about five minutes, then refresh. Try the router's numeric LAN address with /streaming/ if streamhelpers.lan does not resolve. |
| Setup still fails | Note the exact error without sharing tokens, passwords or private commands, then ask the community. |
Alternative: use the private install command
If you prefer SSH, connect to your router and run the exact one-line command on your invitation page. It installs the same dashboard as the Plug-ins method. There is deliberately no working private command on this public wiki.
Wait for the installer to finish, then open the dashboard and complete Guided setup. Do not run both installation methods at once.
Updates, recovery and backups
After installation, use StreamHelpers dashboard → Settings → System update, off air. You do not need a new invitation for ordinary updates.
